(全国第一台增压马达虎钳) 非一般气压缸型结构
The first reinforced motor vice (Non-common pneumatic cyl. structure) in Taiwan.

本产品已获美国发明专利.台湾.大陆等多国多项专利
本虎钳原理是採用自行研发之往复式空气马达（专利结构），以气压连续推动油路方式，来达成自动化，且不需三点组合来过滤水气，其特性绝对为全国所仅有甚而超越国外任何厂牌。
This Product Is The Exclusive Patent Authorized By U,S,A,Taiwan And P.R.C
The principle of this vice is adopting the reciprocating pneu.motor (PAT.stucture) which P&D by inhouse and that employs an air actuated cylinder.Circuiting progressively to make automation,no need the R.F.L unit to filter the moisture,the sole character is superior than any brand in domestic & international market.
超高夹持力
空气源8kg/cm2之低压源，即可达9000kgf之超高挟持力，而挟持力从0-900kgf可藉由调压器自由调整设定。
Super hi-gripping force
Even the air source at low pressure 8kg/cm2 which can be achieved super hi-gripping force 9000kgf, and the 0~9000kgf gripping force can be adjusted freely by pressure regulator.
自动寻找最高气压源
当铜铝类产品轻加工或铸铁类初胚重切削时，用调压器设定在所需压力，也不会因空气源在低点而失压，而且有自动补压及稳压之功能，以确保工件之挟持。
Seeking the highest air source automatically
When processed copper, aluminium etc.non-iron workpiece or raw cast iron etc.,making heavy cutting which can be made adaptable gripping force to ensure work piece clamping and with auto compensating & retaining pressure etc.,functions.
最大挟持安全距离
开关速度只需1.5秒，挟持安全距离可达8mm ,並设有手轮安全缐，可轻易由肉眼辨识出工件挟持之安全距离，是否超限
The biggest safety clamping range:
The shifting speed is only 1.5 sec.with safety range 8mm,also equipped with safety line on hand wheel and can be visible the clamped work piece safety range is exceeded or not.
立、侧、卧三用
定寸规格，本体六面磨光並预留压板槽，不需治具板，即可直立加工。
Triple usage of vertical. side. horizontal
Six faces of vice body be super grinding & pre-setting holding slot,and can be processed vertically without jig fixture.
超高材质
虎钳本体材质採用高延展性之石墨铸铁（FCD-60）一体成型设计。两侧滑轨经硬化热处理（HRC-45）,确保高精度，高耐磨，高抗张力。
Super rugged material
The vice body is adopted hi-tensile graphite casting iron (FCD-60),one-piece design and harden heat-treatment (HRC45) at two slide way which ensured hi-precision ,hi-durability & hi-tensile.
内藏角固下压结构
Submersed angle fixed pressed down structure

型号Model	A	B	C	D	E	F	G	H	I	J	J1	J2	J3	K	L	M	X	夹持力 Gripping Kgf	净重 N.W. Kg	毛重 G.W. Kg
JPV-4"-100	435	320	125	100	145	148	85	15	100	0-100	95-220	100-200	200-300	48	100	16	45	3200	27	29
JPV-5"-150	505	380	125	130	157	160	85	15	110	0-150	95-250	110-275	200-380	55	105	18	45	6000	38	40
JPV-6"-160	525	400	125	160	160	163	85	15	120	0-160	95-260	120-295	210-400	58	105	18	45	6000	48	50
JPV-6"-250	615	490	125	160	160	163	85	15	120	0-250	95-350	120-395	210-490	58	105	18	45	6000	52	55
JPV-7"-200	585	460	125	180	170	173	90	18	130	0-200	100-300	130-350	220-460	63	110	18	72	9000	65	72
JPV-8"-200	595	470	125	200	170	173	90	18	140	0-200	100-310	140-360	230-470	63	110	18	72	9000	70	80
JPV-8"-300	695	570	125	200	170	173	90	18	140	0-300	100-410	140-460	230-570	63	100	18	72	9000	79	90

  

项次 NO.	检查事项 INSPECTION ITEMS  STANDARD:100mm	容许可 GUARANTEED
1	虎钳底部与滑动面平行度 The levelness of the vise bottom with sliding face	0.015mm
2	夹爪端面与底部之垂直度 The verticality of the end of jaws with bottom	0.02mm
3	侧边与滑道面之垂直度 The verticality of side with sliding face	0.02mm
4	钳口面对本座底面T型槽的平行度 The levelness of vise opening with the T-type flute of the vise bottom	0.02mm
5	钳口面对本座底面T型槽的垂直度 The verticality of vise opening with the T-type flute of the vise bottom	0.02mm
6	测试块夹紧后其上面对本座底面之平行度 The levelness of the top testing block with the vise bottom	0.02mm
7	测试块夹紧后对本座底面之上浮量 The excess amount of clamped test block to the vise bottom	+0.02mm
8	本座直面对底面之直角度 The right angle of this vertical unit to the vise bottom	0.02mm