防尘装置：使用迷宫环设计，工作中铁屑及切削液不易进入夹盘内部，使夹盘延长使用寿命与精度保持。

内藏式止逆装置：内藏式止逆阀设计，夹持状态下不需持续供气也能保持夹持力，并且大幅降低工作扭矩减少负载。
提高转速：回转速度范围从100RPM到180RPM，较高的转速能够对应更广范围的应用。
前置式气缸：气缸与夹盘直结设计，确保夹持的稳定性，更方便於组装及操作。
气缸防锈处理：在潮湿及工作环境较差的情况，气缸内部经防锈处理，不会生锈或卡死。

Dust and water proof cover:
Design with Labyrinth Seal Rings, prevent the metal chips and coolant into the internal cylinder to guarantee chuck's performance and service life.
Built in check Valve:
Design with built in Check Valve. It's doesn't need to supply the air continuously and remain low working torque also reduce the air consumption.
Higher Rotation Speed:
The rotation speed from 100RPM to 180RPM, higher rotation speed to fit with more kind of working.
Integral pneumatic cylinder:
Connect chuck and built-in cylinder to each other directly;thus enables operation stability.Moreover, it is more convenient for installation and operation since the use of draw tube and draw bar are no longer necessary.
Rustproof treated cylinder:
The cylinder won’t get rusty and seized even in wet or high moisture working environment.

规格 Spec 型号 Model	通孔直径 Thru hole dia. mm	活塞面积 Piston Area cm2	柱塞行程 Piston stroke mm	爪行程直径 Jaw stroke Dia. mm
RTS-05	16	74	10	4.6
RTS-06	20	120	13	5.5
RTS-08	30	190	16	6.8
RTS-10	43	280	19	8
RTS-05T	16	74	10	4.6
RTS-06T	20	120	13	5.5

规格 Spec 型号 Model	净重 Weight Kg	最高转速 Max RPM	最大设定压力 Max.Pressure kgf/cm2(Mpa)	气压夹持力 Gripping Force At Air Pressure 7kgf/cm2 Kgf(KN)	夹持范围 Gripping Range mm
RTS-05	10	450	7(0.7)	1340(13.1)	Ø4-Ø136
RTS-06	16.8	350	7(0.7)	2330(22.8)	Ø25-Ø166
RTS-08	30.6	300	7(0.7)	3730(36.5)	Ø33-Ø215
RTS-10	45.1	250	7(0.7)	5480(53.7)	Ø43-Ø255
RTS-05T	9.7	450	7(0.7)	1340(13.1)	Ø4-Ø136
RTS-06T	16.3	350	7(0.7)	2330(22.8)	Ø25-Ø166

  

规格 Spec 型号 Model	A	B	C	D	E	F	G	H	I
RTS-05	140	85	16	60	6	182	33.6	62	14
RTS-06	170	93	20	80	7	215	40.4	73	20
RTS-08	215	112	30	110	8	255	42.4	95	25
RTS-10	255	120	43	140	8	300	46.4	110	30
RTS-05T	140	85	16	60	6	182	33.6	62	14
RTS-06T	170	93	20	80	7	215	40.4	73	20

规格 Spec 型号 Model	J	K	L	M	P	N max	N min	O mx	O  min
RTS-05	10	25	6-M8×1.25P	PCDØ118	18.5	26.93	24.62	20.05	6.55
RTS-06	12	31	6-M8×1.25P	PCDØ147	18.5	36.46	33.69	21.55	15.55
RTS-08	14	35	6-M10×1.5P	PCDØ185	19.5	44.92	41.52	29.55	17.55
RTS-10	16	40	6-M10×1.5P	PCDØ220	21.5	53.63	49.59	36.55	17.05
RTS-05T	10	25	6-M8×1.25P	PCDØ118	18.5	26.93	24.62	20.05	6.55
RTS-06T	12	31	6-M8×1.25P	PCDØ147	18.5	36.46	33.69	21.55	15.55

保留技术更改的权利,恕不另行通知 Subject to technology changes without prior information

非标需求可定做 Non-standard requirements can be made