2-JAW SOLID POWER CHUCKS
Click on product image magnification
Online inquiryBrand：NTH
It‵s wedge-hook type 2 jaw closed center power chuck. Suitable for irregular workpiece.
Matching surfaces of all parts are hardened, ground and lubricated directly.
Construction of high rigidity and high clamping accuracy and high rotary speed.
Size unit: mm
| Spec/ Model |
Plunger stroke mm |
Jaw stroke Dia. mm |
Max RPM |
Max.pull force kgf(KN) |
Max gripping force KN |
|---|---|---|---|---|---|
| TL-204 | 15 | 6.9 | 6000 | 540(5.3) | 1500(14.7) |
| TL-205 | 15 | 6.9 | 5500 | 540(5.3) | 1700(16.7) |
| TL-206A5 | 20 | 9.2 | 5250 | 1220(12) | 3460(34) |
| TL-208A5 | 21 | 9.7 | 4750 | 1630(16) | 5100(50) |
| TL-208A6 | 21 | 9.7 | 4750 | 1630(16) | 5100(50) |
| TL-210A6 | 25 | 8.8 | 4000 | 1930(19) | 7300(71.5) |
| TL-210A8 | 25 | 8.8 | 4000 | 1930(19) | 7300(71.5) |
| TL-212A8 | 30 | 10.5 | 3360 | 2750(27) | 10600(103.9) |
| TL-215A8 | 35 | 16 | 3000 | 5600(54.9) | 16800(164.6) |
| TL-215A11 | 35 | 16 | 3000 | 5600(54.9) | 16800(164.6) |
| Spec/Model |
Max.Oil pressure kgf/cm2(Mpa) |
Weight Kg |
Matching cylinder |
Gripping range mm |
|---|---|---|---|---|
| TL-204 | 19(1.9) | 4.1 | S-65 | Ø5-Ø110 |
| TL-205 | 19(1.9) | 6.2 | S-80 | Ø14-Ø135 |
| TL-206A5 | 17(1.7) | 13 14 | S-100 | Ø14-Ø165 |
| TL-208A5 | 16(1.6) | 24 28 | S-125 | Ø17-Ø210 |
| TL-208A6 | 16(1.6) | 24 27 | S-125 |
Ø17-Ø210 |
| TL-210A6 | 19(1.9) | 35 42 | S-125 | Ø22-Ø254 |
| TL-210A8 | 18(1.8) | 35 40 | S-125 |
Ø22-Ø254 |
| TL-212A8 | 18(1.8) | 59 63 | S-150 | Ø22-Ø304 |
| TL-215A8 | 19(1.9) | 100 114 | S-200 |
Ø50-Ø381 |
| TL-215A11 | 19(1.9) | 100 107 | S-200 |
Ø50-Ø381 |
| Spec/Model | Spindle Nose | A | B | C(h6) | D | E | E1 | F | H | J | D1 | D2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TL-204 | - | 110 | 52 | 60 | 80 | 6 | - | - | 25 | 26 | - | - |
| TL-205 | - | 135 | 55 | 80 | 100 | 7 | - | - | 35 | 28 | - | - |
| TL-206A5 | A5 | 165 | 74 84 | 140 | 104.8 | 5 | 15 | 21 | 36 | 34 | 82.56 | 116 |
| TL-208A5 | A5 | 210 | 85 103 | 170 | 133.4 | 5 | 23 | 25 | 36 | 38 | 82.56 | 104.8 |
| TL-208A6 | A6 | 210 | 85 97 | 170 | 133.4 | 5 | 17 | 25 | 36 | 38 | 106.38 | 150 |
| TL-210A6 | A6 | 254 | 89 109 | 220 | 171.4 | 5 | 25 | 34 | 36 | 45 | 106.38 | 133.4 |
| TL-210A8 | A8 | 254 | 89 102 | 220 | 171.4 | 5 | 18 | 34 | 36 | 45 | 139.72 | 190 |
| TL-212A8 | A8 | 304 | 106 118 | 220 | 171.4 | 6 | 18 | 34 | 36 | 50 | 139.72 | 190 |
| TL-215A8 | A8 | 381 | 114 141 | 300 | 235 | 6 | 32 | - | 55 | 60 | 139.72 | 171.4 |
| TL-215A11 | A11 | 381 | 114 130 | 300 | 235 | 6 | 22 | - | 55 | 50 | 196.87 | 260 |
| Spec/ Model | Gmax | Gmin | Rmax | Rmin | L1 | L2 | M1 | M2 | M3 | N | P | S | T |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TL-204 | 18 | 3 | 11.3 | 8.3 | 12 | 25 | M10x1.5 | 4-M8 | - | 52 | 14 | 25 | 10 |
| TL-205 | 9 | -6 | 13.5 | 6 | 14 | 32 | M12x1.75 | 4-M8 | - | 62 | 14 | 25 | 10 |
| TL-206A5 | 101.5 86.5 | 81.5 66.5 | 18 | 7.5 | 14 14 | 39 | M16x2 | 4-M10 | 4-M6 | 73 | 20 | 31 | 12 |
| TL-208A5 | 127 104 | 106 83 | 22.3 | 11.8 | 20 17 | 41 | M20x2.5 | 6-M12 | 6-M10 | 95 | 25 | 35 | 14 |
| TL-208A6 | 127 110 | 106 89 | 22.3 | 11.8 | 20 18 | 41 |
M20x2.5 |
6-M12 | 4-M6 | 95 | 25 | 35 | 14 |
| TL-210A6 | 158 133 | 133 108 | 30.8 | 11.3 | 18 18 | 46 |
M20x2.5 |
6-M16 | 6-M12 | 110 | 30 | 40 | 16 |
| TL-210A8 | 158 140 | 133 115 | 30.8 | 11.3 | 18 25 | 46 |
M20x2.5 |
6-M16 | 4-M8 | 110 | 30 | 40 | 16 |
| TL-212A8 | 163 145 | 133 115 | 48.8 | 12.3 | 22 25 | 54 |
M20x2.5 |
6-M16 | 4-M8 | 130 | 30 | 50 | 18 |
| TL-215A8 | 104 71 | 69 36 | 48.8 | 23.3 | 30 29 | 63 |
M30x3.5 |
6-M20 | 6-M16 | 165 | 43 | 62 | 25.5 |
| TL-215A11 | 104 82 | 69 47 | 48.8 | 23.3 | 30 33 | 63 |
M30x3.5 |
6-M20 | 4-M10 | 165 | 43 | 62 | 25.5 |
Subject to technology changes without prior information
Non-standard requirements can be made
