JAW BORING RING FOR SOFT JAWS
Click on product image magnification
Online inquiry
FEATURE
To Suit for CNC lathe
For adjusting the high accuracy of chuck during machining process.
This boring ring is for 5″、6″、8″、10″、12″、15″ inches power chuck.
The operation process as following：
1. Set the jaws to correct position.
2. Adjust the jaw boring ring to fit the bolt holes.
3. Lock the chuck to clamp the jaw boring ring.
4. Machining the required size.
5. Unlock the chuck.
6. If these steps are operated correctly, the jaw's clamping accuracy will be very precise.
Instructions:
This boring ring not only has the OD. Gripping function,but also can I.D. extanding and punch through.(Illutration 1,2,3).
No pendulum and the force can be 100% when using the ring,high accuracy can be improved.(Illutration 4 )
No bell-mouth issue at the touching suface when clampping the hard jaws.(Illutration 5 )
Size table
|
MODEL |
H |
D1 |
D2 |
S1 |
S2 |
G |
H1 |
O |
N.W.(KG) |
|---|---|---|---|---|---|---|---|---|---|
|
JB-05 |
12 |
140 |
60 |
12 |
28 |
10 |
9 |
13.5 |
1.2 |
|
JB-06 |
12 |
168 |
80 |
12 |
32 |
10 |
9 |
16.5 |
1.5 |
|
JB-08 |
12 |
218 |
115 |
17 |
36 |
10 |
9 |
18.5 |
2.4 |
|
JB-10 |
12 |
258 |
150 |
15 |
40 |
10 |
9 |
18.5 |
3.1 |
|
JB-12T |
15 |
316 |
188 |
21 |
50 |
10 |
9 |
24.5 |
5.4 |
|
JB-12NT |
15 |
316 |
188 |
21 |
50 |
10 |
9 |
21.5 |
5.4 |
|
JB-15 |
20 |
380 |
230 |
23 |
52 |
12 |
16 |
31 |
22 |
For other spec like JB-21,JB-24,JB-32,JB-40,JB-63,JB-79, should be ordered for customization.
Subject to technical changes without the prior information.
Date: 2-4 JUN 2026 Booth No.:C4 2021 Address: Poliforum León
Learn moreITM Industry Europe 2026 Date : 26th to 29th May Add: Poznań International Fair Booth: 5A Nr13
Learn moreExhibition:METALTECH & AUTOMEX 2026 Date: 20-23 May2026 Add: Malaysia International Trade&Exhibition Centre,Kuala Lumpur,Malaysia Booth:L1-2235
Learn more
